Usage Instructions Install
1) Clean the unit’s surface as thoroughly as conceivable. Use rubbing alcohol on a lint-free cloth to take away any grease or other contaminates. Most issues of non-sticking are because of some type of oil or grease that is on the unit PRIOR to installation. Please also wash your hand clean.
2) Peel one piece of the Skin from the paper liner. NOT to let the adhesive side touch anything.
3) Resolve the placement, apply the Skin to the surface The usage of your fingers or the side of your thumb, starting from one corner and working your way across the surface.
4) If a piece is not going on straight, you’ll be able to gently lift it back up. Do not stretch it from its original size.
5) If installed slowly and carefully, there must be NO air bubbles left under the skin. Any air that may grow to be trapped under the skin all the way through installation will go away in time. If the bubble is big or far from the edge, please use a pin break it.
Optional: For the best result, apply hot air to the decal surface to activate chemical agent for better stickiness. The usage of a hair dryer is fine.
Uninstall Simply peel off the sticker. No sticky mess or residue left.
IMPORTANT: This product is NOT A CASE. This product is NOT rubber, silicone, gel, plastic, leather, or a hard case or cover. This product is a form-fitting VINYL skin, sticker, decal crafted to perfectly fit every corner, cutout and curve of the Microsoft Xbox One Console.
Top of the range sticker
1 set = Vinyl skin for XBOX ONE and 2 New Controller Skins and for kinect
Protect your XBOX ONE Console from scratch and dust
Exclusive seller only MaxInvers